Custom Installation

Custom Installation

The custom installation process offers the ability to install specific components, including:

Notes:

Installing an IncrediBuild Agent

To install an IncrediBuild Agent:

  1. Download and run the IncrediBuild setup file.
    The Welcome screen appears.


  2. Click Next.
    The Setup Options screen appears.


  3. Select Install IncrediBuild and click Next.
    The License Agreement screen appears.


  4. Read the terms of the license agreement, confirm acceptance, and click Next.
    The Installation Options screen appears.


  5. Click Custom and then select IncrediBuild Agent.
  6. Click Next.
  7. Repeat the Typical Installation procedure, however, as only one Coordinator should be installed in a single development environment, in step 6, select the 'Connect to remote Coordinator' option.
  8. Click Next.
    The installation process will begin. At the end of the process you will be required to Activating Your License. Increasing the number of Agents in the pool will increase the acceleration. You should install additional Agents on your network and connect them to the same IncrediBuild Coordinator.

Installing an IncrediBuild Coordinator

To install an IncrediBuild Coordinator:

  1. Download and run the IncrediBuild setup file.
    The Welcome screen appears


  2. Click Next.
    The Setup Options screen appears.


  3. Select Install IncrediBuild Coordinator and click Next.
    The License Agreement screen appears.


  4. Read the terms of the license agreement, confirm acceptance, and click Next.
    The Installation Options screen appears.


  5. Click Custom and then select IncrediBuild Coordinator.
  6. Click Next.
    The Coordinator Network Settings screen appears.


  7. In the TCP/IP port field, select the TCP/IP port to be used by the locally installed IncrediBuild Coordinator. If there is a conflict between your network and the default port setting, change the value to a different port number, otherwise use the default port number.
  8. If necessary (i.e., there are multiple subnets in the network), select the 'Automatically open the selected port on Windows Firewall if necessary' checkbox, so that you can adjust the exception-list settings in the Windows Firewall program at the conclusion of the IncrediBuild installation.
    Click Next.
    The Destination Folder Selection screen appears.


  9. If you wish to change the installation destination folder, click Browse, select the desired location and click OK/Save/Open.
    It is recommended to select the Add folder to the system PATH environment variable checkbox, in order to ensure linkage to the IncrediBuild tools without having to specify the full path.
  10. Click Next.
    The following screen appears.


  11. Click Next.
    The installation process will begin.

Installing an IncrediBuild Backup Coordinator

To install an IncrediBuild Backup Coordinator:

  1. Download and run the IncrediBuild setup file.
    The Welcome screen appears.


  2. Click Next.
    The Setup Options screen appears.


  3. Select Install IncrediBuild and click Next.
    The License Agreement screen appears.


  4. Read the terms of the license agreement, confirm acceptance, and click Next.
    The Installation Options screen appears.


  5. Click Custom and then select IncrediBuild Backup Coordinator.
  6. Click Next.
    The Coordinator Selection screen appears.


  7. Select Connect Backup Coordinator to existing Coordinator to connect your locally installed IncrediBuild Backup Coordinator to a remote Coordinator. Specify the Host Name or IP address and the TCP/IP port of the remote Coordinator.
  8. Click Next.
    The following screen appears.


  9. Click Next.
    The installation process will begin.